Bunn ICB Specifikace stáhnout pdf (Strana 20)

ICB Training Manual

Step 6: Rebuild the bypass valve(s)

Remove the hose clamps that secure the tubing to the valve □

Remove the two 11/32 nuts that hold the solenoid bracket to the machine □

Gently remove the tubing from the valve body □

Using a 1/4 nut driver, remove the four screws and separate the valve assembly □

Replace plunger, spring, and rubber seat using the rebuild kit BUNN P/N: 11517.0008 □

Clean any mineral build-up from the valve □

Reassembly is the opposite of disassembly □

Step 7: Check the funnel lock solenoid(s) for correct operation

Step 8: Replace the seat cup in the hot water faucet (annually)

Unscrew the faucet bonnet from the assembly □

Remove the old faucet seat cup □

Install the new seat cup BUNN P/N: 02766.0000 □

Reassembly is the opposite of disassembly □

Step 9:Visuallyexaminethepowercordforanydamage

Step 10:Visuallyexaminethewatersupplyforanyleaks

Step 11:Calibratesprayheadowrateandbypassowrate

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Žádné komentáře

Bunn ICB Specifikace Strana 20