Bunn IMIX-5S+ Servisní příručka

IMIX®-3S+ IMIX®-3S+A IMIX®-5S+ IMIX®-5S+AINSTALLATION & OPERATING GUIDEBUNN-O-MATIC CORPORATIONPOST OFFICE BOX 3227SPRINGFIELD, ILLINOIS

10PROGRAMMING CUP SIZES - Portion Control Models The cup size can be programmed in portion control models by “EXAMPLE” or “TIME”. Programming by EX-A

11PORTION CONTROL ? NO EXIT YESPress and release right switch (advance to next menu), “TANK TEMP XXX°” appears on screen.PROGRAMMING THE DISPENSER (

12XX° CAL XX° (-) Tank Temp (+)PROGRAMMING THE DISPENSER (cont.)DRINK STRENGTH 1 (-) XX (+)PRESS DISPENSETO CHECK TASTETASTE 1

13PROGRAMMING THE DISPENSER (cont.)RINSE ALARM ? NO EXIT YESHEAD 1 DISABLE ? NO EXIT YESSET PASSWORD ? (-) XXXX (+)Returns to (G) (pag

238987 080112BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) Airpots, thermal

3WARNING!Fill water tank before turning - on - thermostat or connecting applianceto power source.Use only on a properly protectedcircuit capable of th

4ELECTRICAL REQUIREMENTSCAUTION - The dispenser must be disconnected from the power source until specified in Electrical Hook-Up.The 120 volt version o

538987 120513PLUMBING REQUIREMENTSThis dispenser must be connected to a cold water system with operating pressure between 20 and 90 psi (138 - 620 kPa

638987 120513RUNNING A RINSE SEQUENCE1. Place the Normal/Program/Rinse switch (page 9) in the “rinse” position.2. Sequentially at each position, pr

7CLEANINGThe use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all sur-faces on Bunn-O-Matic equipmen

8Adjust tank temperature (190° F maximum)Adjust minimum tank ready temper-ature for lockout (185° maximum)Adjust hopper motor speed for station select

9Digital Beverage ControlDigital Beverage ControlSTOPPROGRAM HOME SCREEN The screen above will be shown when the dispenser is ready for use.